o=number of isolated outputs (20,16,12,8,4,oder 0)
Configurable interrupt line
All inputs can be sampled at the same time
Input voltages for process or logic voltages
Open collector outputs
Watch-dog-timer on board
Description
Module types
The module X-OPT-io provides 20 electrically isolated (opto-coupler) channels.
"i" stands for the number of inputs, "o" stands for the number of outputs.
Inputs
The high speed inputs can cause interrupts and can be read by software. All modules are available
in 2 different versions: /L (logic level inputs) or /P (process level inputs).
Outputs
Modules with mark /x provide outputs for 40 V at 90 mA, modules without this mark 70 V at 20 mA.
Watchdog
The module provides an watchdog. If this will not be triggered in time, all outputs will be
switched off. Additional the watchdog can cause an interrupt.