| Module |
MDD Version |
Release Date |
Changes |
| BASiS-6 |
1.A.003 |
2004-08-18 |
1. Attention: change program number to 80F2h; 2. New: LED channel
|
| CANbox® |
1.A.003 |
2005-09-21 |
Allow startup settings to be saved in EEPROM |
| MAX2box |
1.A.003 |
2005-09-21 |
Allow startup settings to be saved in EEPROM |
| MAX5dip |
1.A.004 |
2003-05-13 |
First release (only available for OsX) |
| Message MDD |
1.D.000 |
2004-02-16 |
Bugfix for OsX-version |
| X-5B-1 |
1.E.007 |
2003-12-08 |
/WE timing adjusted |
| X-5Bx64-8 |
1.A.002 |
2003-04-23 |
New Win32-interface |
| X-AD12-16 |
2.C.003 |
2007-10-02 |
Bugfix when using the start triggers (sometimes wrong measure values where delivered) |
| X-AD14-20 |
2.C.018 |
2009-06-10 |
Bugfix in DMA mode |
| X-AD16-4 |
1.H.001 |
2006-01-30 |
The correction values coming from the EEPROM are now buffered in the RAM, so that the channels can be opened faster |
| X-AD20-4i |
1.A.009 |
2007-04-03 |
Support for subtype /E and /4 |
| X-AD24-4 |
1.E.018 |
2007-04-04 |
Support for NTC5k sensors extended |
| X-C16-3 |
1.H.019 |
2005-09-28 |
Support for Rev. C added |
| X-CAN-2 |
3.D.003 |
2005-12-13 |
BugFix: An error occured when XCAN_MIXED_FORMAT and XCAN_GENERAL_ID was used at the same time |
| X-COM-4 |
1.F.012 |
2008-03-10 |
Changes and corrections in buffer management and interrupt handling. |
| X-COM-8 |
1.B.007 |
2008-03-10 |
Changes and corrections in buffer management and interrupt handling. |
| X-CPLD-38 |
1.A.005 |
2003-07-14 |
Bugfix: using interrupt channel can cause OsX crash |
| X-DA14i-4 |
1.K.005 |
2006-10-19 |
Bug for signed values while calibration fixed |
| X-DA16i-4 |
1.K.005 |
2006-10-19 |
Bug for signed values while calibration fixed |
| X-DAD-4 |
2.C.005 |
2006-10-19 |
Bug for signed values while calibration fixed |
| X-DIO-32 |
1.I.001 |
2005-10-12 |
Support for Rev D |
| X-DIO-40 |
1.I.001 |
2005-10-12 |
Support for Rev D |
| X-DPS-1 |
1.E.003 |
2004-10-29 |
Changes in initialization |
| X-DPS-2 |
1.E.003 |
2004-10-29 |
Changes in initialization |
| X-ETH-10 |
1.B.002 |
2006-02-06 |
Fixed problems when having strong interrupt traffic |
| X-MAX-400 |
1.B.001 |
2006-04-11 |
Bugfix in serial interface and service CMD_RESET implemented |
| X-MAX-E |
1.B.002 |
2006-02-06 |
Fixed problems when having strong interrupt traffic |
| X-MIX-26 |
1.A.002 |
2007-02-06 |
First release: Support for X-MIX-26 module |
| X-OPT-xxx |
1.E.002 |
2005-05-19 |
Support for Rev. C |
| X-REL-8 |
2.B.001 |
2003-04-17 |
MDD triggers watchdog within the watchdog interrupt-service-routine |
| X-SCC-2 |
1.C.001 |
2004-04-20 |
First release (configuration-, interrupt- and register channels are implemented) |
| X-SSI-2 |
1.E.003 |
2005-01-10 |
Bugfix at setting XBus Clock. Semaphore will not be checked correctly |
| X-TEST-1 |
1.E.005 |
2005-06-01 |
Support for Rev. C |
© SORCUS Computer GmbH ·
Im Breitspiel 5 ·
D-69126 Heidelberg ·
Tel.: +49(0)6221/3206-0 ·
www.sorcus.com
Fragen und Anregungen zu dieser Seite senden Sie bitte an:
