X-SCC-2

  • 2 universal serial interfaces with ESCC
  • for sync, async, SDLC, HDLC, bisync., etc.
  • baudrate generator, DPLL and FIFO each channel
  • with RS-4xx bus termination resistor via software switchable.


Description

The X-SCC-2 module offers 2 independent serial communication channels. It uses the ESCC Z85230 "Enhanced Serial Communication Controller" from ZILOG, with a 14.7456 MHz quartz oscillator for this. The controller has an 8 byte receive FIFO and a 4 byte send FIFO for each channel.
This controller offers a large number of operating modes, such as asynchronous communication, byte-oriented synchronous communication (monosync or bisync protocols) and bit-oriented synchronous protocols (HDLC or SDLC).
When used as an RS-232 interface, all the modem control signals (RTS, CTS, DTR, DSR, Ri, DCD) are present, as is an additional clock input to CLKio.
A clock signal can be provided externally or generated internally. A baudrate gene-rator and PLL are available for each channel. CLKio, Ri and CTS can, for instance, be programmed as clock inputs and RTS as a clock output.

Specifications

Parameter min. max. Einheit Bemerkung
Anzahl digitaler Prozeß-Eingänge   32 -  
Eingangsspannung Low   <66% VB V VB = Versorgung
High >82% VB   V VB = Versorgung
Hysterese   100 mV  
Pull-Up, Pull-Down Stromquellen   32 -  
Stromquellen, programmierbar je Kanal 0,2 0,6 oder 2   mA  
Digitale Entprellfilter        
Anzahl digitaler Prozeß-Ausgänge   32    
Typ High Side      
Ausgangsstrom 150 500 mA  

Module versions

Typ Temp. Kurzbeschreibung
X-SCC-2/U 0...70°C 2 async, sync. Kanäle, umschaltbar RS-232, RS-422, RS-485, inkl. progr. Busabschluß, je Kanal zusätzlicher RS-232 Pin mit wählbarem Ein-Ausgangssignal. 3,3V Versorgung
X-SCC-2/R 0...70°C 2 async, sync. Kanäle, RS-232 (max. 120 KBaud), je Kanal zusätzlicher RS-232 Eingang mit wählbarem Signal. 3,3V und +/-12V Versorgung
X-SCC-2/C 0...70°C 2 async, sync. Kanäle, RS-232 (max. 120 KBaud) und 20 mA Signale, je Kanal zusätzlicher RS-232 Eingang mit wählbarem Signal. 3,3V und +/-12V Versorgung
iX-SCC-2 -40...85°C 2 async, sync. Kanäle, RS-232, RS-422, RS-485 umschaltbar inkl. progr. Busabschlußwiderstände und 20mA Signale, je Kanal zusätzlicher RS-232 Pin mit wählbarem Ein-Ausgangssignal. 3,3V und +/-12V Versorgung